Name: passive keyless entry smart car alarm system long distance
remote start stop engine feature
Model No : T173A
This is cardot new smart car alarm system with remote start,push
start,passwords key pad and other more practical features and
functions.please read this manual before using or installing our
product!specially for some important points as below:
1. In driving,don't press start button at will in case of sudden
engine off,incurs dangerous situations.
2. If your car has window closer module,don’t leave children inside
the car alone.
3. Please change default passwords of touch key pad promptly after
4. Please don't put smart key and mobile together,mobile signal
will take interference to smart key normal working.
5. Under the service mode,you can press mute button to disable auto
induction function,if need,you also can enable auto induction
function by pressing unlock button.
6. Must press the footbrake when push start,don’t need to press
footbrake when push stop car engine.
7. If you want to stay inside the car for long time,please disable
auto induction function to save smart key battery power by pressing
8. Auto induction function will be closed automatically if your car
stay in a place for more than 3days,but it will recover by pressing
remote unlock button.
9. System only recognize one smart key to save battery power of the
other one,if you want to enable the other smart key,only press any
button of remote manually.
Product Basic Functions:
1. remote arm disarm
2. mute arm disarm
3. mute alarm
4. shock alarm
5. passive keyless entry
6. remote start stop
7. push start stop
8. passwords touch key pad lock or unlock
9. support manual transmission car and auto transmission car
but manual transmission car has not remote start function!
10. support diesel mode and petrol mode car
11. fits low temperature or high temperature weather
12. push stop engine without pressing footbrake
13. push start by pressing footbrake
14 .hopping code protection
15. passwords touch key pad unlock
16. positive /negative siren signal jumper setting,factory output
is negative signal
17. bypass module optional!and extra value!
18. remote open trunk
19. central lock automatication
20. trunk open output +/- jumper setting
21. open door flashing light
22. hints of inproper closing car door
23. service mode
24. +/- side door
25. connecting oil path wire or not by DIP setting
26. start time extended by dip setting
27. side door delay time dip setting
28. 3D smart key remotes and 3D pke antennas
29. outside learning button for remote program
Shock Sensor Current<1mA
Direction Light 5A,siren 1A
PKE working frequency:125KHZ
Remote Working Frequency:433.92mhz
Output current:ACC/ON/START 30A
Remote static current<10mA